What is a dust collector? The Airex Industries Model CI Dust Collector is ideally suited for schools or small industrial applications where large volume or air are required for relatively small amounts of dust collected. This dust collector is primarily designed for limited ceiling height installations.

The CI dust collector unit is divided into four basic sections, the top section of the dust collector being the storage containers for the collected waste material. The centre two sections of the dust collector are the primary and secondary filtration units. The material enters the dust collector via the inlet duct into the cyclonic separation section to remove the heavy particles. The section immediately above it is the secondary filtration area, where tubular type filters are used with various filter media available for various applications. This gives a highly efficient type of dust collector.

The material storage area of the dust collector and the secondary filtration section are accessible through large access doors which allow for easy material removal and filter maintenance of the unit. The dust collector Model CI is part of the CE series of dust collectors and designed by Airex Industries in which standardized construction methods and parts are used to create a highly efficient unit and still maintain a low cost.

The dust collector unit requires a minimum of maintenance. All parts which must be maintained are easily accessible behind the dust collector.
The dust collector unit is supplied ready to operate, requiring only connection to a power source through a starter and into the unit. The dust collector unit is ruggedly constructed and has a very convenient material storage and removal all packaged into a single completely self-contained unit.

Air to cloth ratios can be changed for extremely difficult types of material handling although the standard dust collector unit is designed for maximum efficiency in most woodworking applications. Hopper storage section are available for certain installations and automatic shaking mechanisms inside the dust collector are available for your secondary filtration section.

The Cyclotube CE dust collector is mainly highlighted by the superior output of its whirling action, but it also offers high efficiency and durability by using special fibers in the confection of the bags.
The design of the dust collector and advanced features not only meets the highest industrial standards, they put the Cyclotube CE in the enviable position of being among the top dust collectors available.

Air pollution caused by dust emissions, but fought by a dus collector, is a serious problem for most industries. Industrial hygiene and dust collector must be given more attention now that its relation to worker health has been clearly established. The principle of bag filtration included in a dust collector is recognized as the safest and most efficient for dust collection. AIREX Industries has been designing and manufacturing bag type dust collectors for many years.

Airex Industries dust collectors are designed for industrial applications, including the removal and filtration of dust, smoke and other airborne pollutants. Hazardous materials are removed from the dust collector before reaching the worker breathing zone. Reverse pulse self cleaning requires virtually no maintenance while prolonging filter life and units efficiency. This dust collector complies with environmental clean air regulations.

Cyclones are frequently used as product receivers, as pre-cleaners to high efficiency fabric-type dust collectors, or as independent collectors for coarse dusts. The Airex Cyclopulse is our unique concept of high efficiency / low cost dust collector. The diversity of its applications make it the dust collector best suited for industrial installations operating in material handling, rock, wood and metallurgical products and many others.

The cyclopulse dust collector is equipped with a cyclonic pre-separation module allowing for use in high dust loads by limiting the particles to be filtered in its media filtering module. The remarkable efficiency of this dust collector is the result of many efforts in R & D testing and will meet the most critical standards in the industry.

The Airex Cyclopulse dust collector ranks among the top available collectors for the wood processing industry and other heavy load applications.

dust collector